EASYCNC BLOGS

30i/31i/32i and 300i/310i/320i CNC Control Test Systems

Series 0iA, 0iB, 0iC, 0iD CNC Control Test Systems

Series 16i/160i CNC Control Test Systems

Series 18i/180i CNC Control Test Systems

Series 21i/210i CNC Control Test Systems

Series 16/18/21i Spindle Drive Control Test Systems

Series 16/18/21 CNC Control Test Systems

Series 16/18/21 CNC Control Test Systems

Series 15 CNC Control Test Systems

Beta Series Motion Control Test System

I/O Module Test Systems for CNC and Robotics

Series 11 CNC Control Test Systems

Series 9, 10, 11 & 12 Legacy CNC Control Test Systems

Series 3, 5, 6 & 7 Legacy CNC Control Test Systems

Testing Alpha i, Alpha, Beta i, and Beta Servo Amplifiers under 60 amps at Maximum Rated Load.
NEW! Now also testing C-Series and Vintage Drives
For decades, we have tested all our parts under load.

Now with our proprietary Maximum Rated Load Tester, we are able to push the envelope to help ensure we Deliver Uptime with industry-leading quality.

Customers trust EASYCNC Industrial because they know we have an extensive array of Fanuc Test Systems installed at our facility. Our substantial investment in testing capabilities mean we can duplicate their CNC control systems because we have one for each Fanuc model application installed in our facility. Customers can trust their part is being tested on a control system that matches their application.  

Our competitors without such extensive test systems must “simulate” and use a generic control or a partial Fanuc control. This type of testing can lead to “control system faults” not being able to be detected.

We are able test all the Fanuc parts we sell and repair under load to help ensure the parts you receive Deliver Uptime by working right out of the box.

Now, we have taken our commitment to testing even further with our Maximum Rated Load testing program. These new testers ensure the customer will receive a part that can operate reliably, without faults in the most severe conditions.
Our new, maximum load stands apply the maximum load current, including the all-important “startup surge current” (as stated by the manufacturer). Maximum current is pulled from electronics from each axis and in both directions. We do this while continually monitoring all “fault” conditions. Typically, the “start-up” load current far surpasses that of normal operating conditions.

TIE’s Load Testing Strategy ensures electronics will perform in even the most extreme environments.

Currently Testing Under Maximum Rated Load:
Alpha i Drives

A06B-6114-XXXX
A06B-6117-XXXX

EASYCNC Industrial is excited to announce we are now offering robot wrist refurbishment and repair services.

One of the main goals for every manufacturer is to eliminate downtime. Most manufacturers do this by keeping extra parts for robots in stock. These parts typically do not include replacement wrists for your industrial robot. That is where we at EASYCNC Industrial come in. Plus, we stock refurbished wrists for sale. In-stock wrists usually ship the same business day, and you can save even more with our wrist core exchange program. 

Common Causes for Wrist Repair in Fanuc Robots
Servo Motor Fault
Shaft Fault
Brake Fault
Mounted Head Grounded
Bearing Failure
Seal Failure
Over Heat
Crashes
Lack of Lubrication
These common failures can be caused by a variety of factors including but not limited to coupling misalignment, oil leaks, drive faults, motor feedback or shorts, contamination and more. Our proven process for refurbishing industrial robot wrist parts brings you a like new product for while saving 50 – 75% off OEM pricing. Our one of a kind cleaning and testing system helps ensure that we deliver your product back to you working like new for up to a third of the cost of a new product.

Our Current Fanuc Wrist Repair Capabilities
Fanuc R2000iA 165kg A290-7324-T503

Fanuc R2000iB 165kg A290-7329-T501

Fanuc R2000iC 165kg A290-7333-T501

Fanuc R2000iC 210kg A290-7333-T501

Fanuc M710iC 50/70kg A290-7125-T501

EASYCNC Industrial is Your Go to for Robot Maintenance & Spare Parts
Click an image below to check stock on our drives, grease/lubricant, and teach pendants.

Drives

Grease &
Lubricants

Teach Pendants

 
EASYCNC offer repair and test service for Fanuc / Mitsubishi / Okuma / Yaskawa / Siemens components (controller / drive / board / motor...) as low as $200 only.

Please send email  to us or contact Ms.Amy at WhatsApp / Wechat: +8618948166151 for more information.

The PRODUCTS LISTs are basically quoted and processed from the internet for education purpose.

Please kindly share your opinion if anything that may require improvement or correction.

Many thanks for your support!

Website: www.easycnc.com 

Email: [email protected] 

Welcome to EASYCNC online shopping for spare parts & test stands!

A05B-2400-C101 FANUC A05B2400C101 PCB ROBOTICS OPERATORS PANEL RJ3 (A05B 2400)
A05B-2316-C105 FANUC A05B2316C105 PCB ROBOTICS 3 SLOT BACKPLANE RJ2 (A05B 2316)
A16B-1010-0331 FANUC A16B10100331 PCB MASTER CONTROL (A16B 1010)
A16B-2201-0851 FANUC A16B22010851 PCB PMB-NB (A16B 2201)
A16B-1310-0300 FANUC

 
EASYCNC offer repair and test service for Fanuc / Mitsubishi / Okuma / Yaskawa / Siemens components (controller / drive / board / motor...) as low as $200 only.

Please send email  to us or contact Ms.Amy at WhatsApp / Wechat: +8618948166151 for more information.

The PRODUCTS LISTs are basically quoted and processed from the internet for education purpose.

Please kindly share your opinion if anything that may require improvement or correction.

Many thanks for your support!

Website: www.easycnc.com 

Email: [email protected] 

Welcome to EASYCNC online shopping for spare parts & test stands!

A05B-2022-C122 A05B-2022 FANUC CNC CRT UNIT - (A05B2022C122)
A03B-0815-C002 A03B-0815 FANUC CNC 24/16 I/O EXPANSION A - (A03B0815C002)
A02B-0281-C120#TBS A02B-0281 FANUC CNC SEPARATE SMALL UNIT - (A02B0281C120)
A05B-2301-C192 A05B-2301 FANUC CNC ARC WELDING - (A05B2301C192)
A03B-0819-C165 A03B-0819 FANUC

 
EASYCNC offer repair and test service for Fanuc / Mitsubishi / Okuma / Yaskawa / Siemens components (controller / drive / board / motor...) as low as $200 only.

Please send email  to us or contact Ms.Amy at WhatsApp / Wechat: +8618948166151 for more information.

The PRODUCTS LISTs are basically quoted and processed from the internet for education purpose.

Please kindly share your opinion if anything that may require improvement or correction.

Many thanks for your support!

Website: www.easycnc.com 

Email: [email protected] 

Welcome to EASYCNC online shopping for spare parts & test stands!

A02B-0166-C203#R A02B-0166 FANUC CNC 9 MONO CRT UNIT - (A02B0166C203)
A02B-0094-C028 A02B-0094 FANUC CNC 9 CRT UNIT - (A02B0094C028)
A02B-0166-C271#TR A02B-0166 FANUC CNC 7.2 MONOCHROME LCD UNIT - (A02B0166C271)
A02B-0061-C606 A02B-0061 FANUC CNC TERMINAL UNIT - (A02B0061C606)
A02B-0083-C180 A02B-0083

 
EASYCNC offer repair and test service for Fanuc / Mitsubishi / Okuma / Yaskawa / Siemens components (controller / drive / board / motor...) as low as $200 only.

Please send email  to us or contact Ms.Amy at WhatsApp / Wechat: +8618948166151 for more information.

The PRODUCTS LISTs are basically quoted and processed from the internet for education purpose.

Please kindly share your opinion if anything that may require improvement or correction.

Many thanks for your support!

Website: www.easycnc.com 

Email: [email protected] 

Welcome to EASYCNC online shopping for spare parts & test stands!

A06B-6041-H010 FANUC DC SPINDLE DRIVE Amplifier (A06B6041H010)
A06B-6058-H331 FANUC AC SERVO DRIVE Amplifier 3 AXIS (A06B6058H331)
A06B-6053-H002 FANUC AC SERVO DRIVE Amplifier ANALOG (A06B6053H002)
A06B-6089-H202 FANUC SERVO DRIVE Amplifier 2 AXIS ALPHA SERVO DRIVE (A06B6089H202)
A06B-6053-H003 FANUC

 
EASYCNC offer repair and test service for Fanuc / Mitsubishi / Okuma / Yaskawa / Siemens components (controller / drive / board / motor...) as low as $200 only.

Please send email  to us or contact Ms.Amy at WhatsApp / Wechat: +8618948166151 for more information.

The PRODUCTS LISTs are basically quoted and processed from the internet for education purpose.

Please kindly share your opinion if anything that may require improvement or correction.

Many thanks for your support!

Website: www.easycnc.com 

Email: [email protected] 

Welcome to EASYCNC online shopping for spare parts & test stands!

A06B-0830-B301 FANUC Spindle Motor Model AP30, FLANGE, SLK (A06B0830B301#3000 )
A06B-0852-B300 FANUC Spindle Motor Model A2, FLANGE, SLK (A06B0852B300#3000 )
A06B-0856-B302 FANUC Spindle Motor Model A12, FLANGE, SLK (A06B0856B302#3000 )
A06B-0828-B301 FANUC Spindle Motor Model AP18, FLANGE, SLK (A06B0828B301#3000

 
EASYCNC offer repair and test service for Fanuc / Mitsubishi / Okuma / Yaskawa / Siemens components (controller / drive / board / motor...) as low as $200 only.

Please send email  to us or contact Ms.Amy at WhatsApp / Wechat: +8618948166151 for more information.

The PRODUCTS LISTs are basically quoted and processed from the internet for education purpose.

Please kindly share your opinion if anything that may require improvement or correction.

Many thanks for your support!

Website: www.easycnc.com 

Email: [email protected] 

Welcome to EASYCNC online shopping for spare parts & test stands!

A06B-0521-B564 FANUC AC SERVO Model 2-0, ST, SLK, 20,000P HR (A06B0521B564)
A06B-0564-B102 FANUC AC SERVO Model 6L, TPR, BRK, 2500P INC (A06B0564B102)
A06B-0561-B075 FANUC AC SERVO Model AL3/3000, TPR, a64 (A06B0561B075)
A06B-0564-B077 FANUC AC SERVO Model AL9/3000, TPR, i64 (A06B0564B077)
A06B-0571-B202

 
EASYCNC offer repair and test service for Fanuc / Mitsubishi / Okuma / Yaskawa / Siemens components (controller / drive / board / motor...) as low as $200 only.

Please send email  to us or contact Ms.Amy at WhatsApp / Wechat: +8618948166151 for more information.

The PRODUCTS LISTs are basically quoted and processed from the internet for education purpose.

Please kindly share your opinion if anything that may require improvement or correction.

Many thanks for your support!

Website: www.easycnc.com 

Email: [email protected] 

Welcome to EASYCNC online shopping for spare parts & test stands!

A06B-0372-B677 FANUC AC SERVO Model A2/2000, ST, SLK, BRK, i64 (A06B0372B677)
A06B-0313-B081 FANUC AC SERVO Model 0S, TPR, 10,000P HR (A06B0313B081)
A06B-0369-B275 FANUC AC SERVO Model 3-0F, ST, KEY, BRK, a64 (A06B0369B275)
A06B-0332-B276 FANUC AC SERVO Model A100/2000, TPR, BRK, a64 + S.C. (A06B0332B276)